Impact Plastics Blog

The Difference Between Amorphous & Semi-crystalline Polymers

Posted by Natalie K. MacVarish on August 23, 2017


Impact-plastics-polyethylene-pellets.jpgA defining characteristic that separates different thermoplastic polymers is whether they are considered amorphous or semi-crystalline. Popular thermoplastics used in the packaging industry such as HDPE and polypropylene, are classified as semi-crystalline, while others such as polystyrene and ABS, are considered amorphous. The main difference between these classes of thermoplastics are the arrangement of the molecular chains and how they, in turn, affect the behavior of the polymer under heat. Continue reading to learn more about the differences between the two thermoplastic classifications:

Receiving the classification of a semi-crystalline polymer means that the material exhibits organized and tightly packed molecular chains. The areas of crystallinity are called spherulites and can vary in shape and size with amorphous areas existing between the crystalline areas. A result, this highly organized molecular structure results in a defined melting point. These polymers are anisotropic in flow, so they exhibit greater shrinkage transverse to flow rather than with the flow, which can sometimes result in some dimensional instability.

amorphous-vs-semicrystalline-polymers.pngIn terms of properties, semi-crystalline thermoplastics have good strength & wear, and good chemical resistance, but they typically lack in impact resistance. In addition, the degree of crystallinity can affect many characteristics of the polymer. There can be varying degrees of crystallinity among different materials and as well as variations among of the same material. Materials with a higher molecular weight, for example, typically have a lower degree of crystallinity with more imperfect crystals. Highly branched polymers can also exhibit a lower degree of crystallinity, as can be seen when comparing the more branched low density polyethylene (LDPE), which is a more flexible less dense product vs. its more crystalline counterpart, high density polyethylene (HDPE).

While semi-crystalline polymers exhibit organized and tightly packed molecular chains, the polymer chains for amorphous plastics are more disorganized. In this type of material the molecules are oriented randomly and are intertwined, which causes them to have a range of temperatures at which they will melt. To give you visual, the organization, or lack thereof, of the polymer chains are often compared to a plate of cooked spaghetti. This characteristic also makes for an easier thermoforming process. These polymers are isotropic in flow, so they shrink uniformly in the direction of the flow and transverse to flow. This typically results in less shrinkage and less tendency to warp. In terms of properties, amorphous polymers typically have better impact resistance, but are more prone to stress cracking and have poor fatigue resistance. In addition, these polymers are typically transparent.


Request a Material Consultation!

Not sure which material is right for your application?  For more information on our products, check out our materials page or click on the link to the left to get in touch with our sales team today!

 

Topics: plastic sheet, material selection

About Impact Plastics

Learn More About What We Do

Impact Plastics is a custom sheet extrusion company specializing in the production of thin gauge plastic sheet and rollstock. To learn more about what we do:

Subscribe to Email Updates

Recent Posts